Skip to Content
FollowMe printing is Fuji Xerox's solution to allow documents to be submitted for printing and collected from any Fuji Xerox device on the same campus.
Printing can be initialised and collected (on the same campus) by using your Student ID card or by logging in on the touch panel connected to the device. If you do not have enough credit to print your print job will stay in the queue for 24 hours so you can top up your print budget.
Information on these methods and other questions around collection can be found at How do I collect my printing?
Please note the rates below are GST exclusive, however GST is charged when you top up your print budget i.e. A top up of $5 will result in $4.35 being credited to your account.
The rates below apply to each printed side of paper, so an A4 mono page printed on both sides will incur a charge of 10 cents.
|A4 Mono||5 cents|
|A4 Colour||40 cents|
Students will have the amounts deducted from their printing budget.
Staff-type usercodes (e.g jcbloggs) have their printing charges captured via their login, which is then charged back to the Department through usual ITS charging processes.
At each MFD installation, there should be a "Quick Reference Poster" displayed on a wall nearby. However, there is an expanded guide also:
Page authorised by CIO
Last updated on Friday 26 October 2018